Tuesday, April 12, 2011

5-1/4' Inch DA Black Finishing Pad - LAKE COUNTRY CCS TECHNOLOGY

5-1/4' Inch DA Black Finishing Pad - LAKE COUNTRY CCS TECHNOLOGY Reviews


Other Picture


5-1/4' Inch DA Black Finishing Pad - LAKE COUNTRY CCS TECHNOLOGY Feature

  • Slows rate of polish absorption As discussed above, the pads are slow to absorb products and therefore the paint benefits from a longer working time. The same is true of liquid waxes and sealants.
  • Improves operator control CCS pockets gradually release polish as needed by the operator. Since these areas are not absorbing polish, they serve as little reservoirs until the excess polish is needed.
  • Prevents pad skipping CCS pockets reduce surface tension allowing the operator to run pad flat on a working surface. Basically, the CCS pockets break up the smooth surface of the foam to eliminate the sticking and skipping that occurs when two perfectly flat surfaces meet.
  • Creates less heat CCS pockets provide several points where the foam is not completely touching the paint. This reduces friction and therefore heat generated between the pad and the paint.
  • OEM approved OEM tests confirm CCS pads out-perform convoluted pad designs.
Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes. Tested an approved at OEM levels, these pads using strategic patterns of partially closed cells reduce the rate of polish absorption, improves operator control whilst at the same time reducing heat.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 13, 2011 01:32:04

No comments:

Post a Comment