Wednesday, September 14, 2011

8' Orange Light Cutting Pad- LAKE COUNTRY CCS TECHNOLOGY (8"inch)

8' Orange Light Cutting Pad- LAKE COUNTRY CCS TECHNOLOGY (8"inch) Reviews


Other Picture


8' Orange Light Cutting Pad- LAKE COUNTRY CCS TECHNOLOGY (8"inch) Feature

  • Slows rate of polish absorption As discussed above, the pads are slow to absorb products and therefore the paint benefits from a longer working time. The same is true of liquid waxes and sealants.
  • Improves operator control CCS pockets gradually release polish as needed by the operator. Since these areas are not absorbing polish, they serve as little reservoirs until the excess polish is needed.
  • Prevents pad skipping CCS pockets reduce surface tension allowing the operator to run pad flat on a working surface. Basically, the CCS pockets break up the smooth surface of the foam to eliminate the sticking and skipping that occurs when two perfectly flat surfaces meet.
  • Creates less heat CCS pockets provide several points where the foam is not completely touching the paint. This reduces friction and therefore heat generated between the pad and the paint.
  • OEM approved OEM tests confirm CCS pads out-perform convoluted pad designs.
Orange Light Cutting Pad-This firm, high density foam is ideal for scratch and defect removal. The orange foam offers the correction of a typical compounding pad whilst at the same time allowing the polishing ability of light cut foam pad. When used with heavier compounds it will remove moderate swirls and scratches with little or no haze. It s an all around pad that will work on most light to moderate imperfections. (Measures 3.5 inches wide) Lake Countries CCS Technology revolutionize foam buffing pads. The patented Collapsed Cell Structure Technology is the result of many years research and development by Lake Country manufacturing. Tested an approved at OEM levels, these pads using strategic patterns of partially closed cells reduce the rate of polish absorption, improves operator control whilst at the same time reducing heat.


Visit Store Now !!

Detail Products

Detail Reviews




Sep 15, 2011 03:18:09

Tuesday, September 13, 2011

3M Finesse-It Roloc Finish Pad (3-Inch)

3M Finesse-It Roloc Finish Pad (3-Inch) Reviews


Other Picture


3M Finesse-It Roloc Finish Pad (3-Inch) Feature

  • Made with soft foam with an aggressive hook and look face
  • Holds the hook and loop-backed Finesse-It buffing pad (#81470) firmly in place
  • Soft foam provides good conformability
FINESSE-IT ROLOC FINISHING PAD holds the 3" Finesse-it Natural Buffing Pad.Provides a soft surface for excellent results.


Visit Store Now !!

Detail Products

Detail Reviews




Sep 14, 2011 01:24:06

Sunday, September 11, 2011

1-Pad Tangerine Foam Light Polishing Pads, 3 pack

1-Pad Tangerine Foam Light Polishing Pads, 3 pack Reviews


Other Picture


1-Pad Tangerine Foam Light Polishing Pads, 3 pack Feature

  • With 1-Pad buffing pads, you use a fresh, new pad every time you detail. You don't spend valuable time cleaning pads.
  • When your detail is finished, throw the pads away.
  • Each 1-Pad uses 65% less material than most conventional foam pads. However, the system still provides plenty of cushioning.
  • The tangerine foam is made for light to moderate defect removal and polishing.
  • **Should ONLY be used with the Lake Country patented Tri-Density backing plate (sold separately)
How do you ensure that your buffing pads are clean? Use the Lake Country 1-Pad Polishing System and you'll never risk cross-contamination. Lake Country 1-Pads are designed for a single use. Each 1-Pad uses 65% less material than most conventional foam pads. However, the system still provides plenty of cushioning. **Should ONLY be used with the Lake Country patented Tri-Density backing plate (sold separately)


Visit Store Now !!

Detail Products

Detail Reviews




Sep 12, 2011 02:39:04

Friday, September 9, 2011

7-1/2 Inch Black Variable Contact Finishing Buffing Pad

7-1/2 Inch Black Variable Contact Finishing Buffing Pad Reviews


Other Picture


Eastwood Variable Contact Foam Pads 7-1/2" Black Foam Variable Contact Cutting Pad - A domed, varying-radius face profile for more usable surface area to provide excellent performance with minmal danger of paint burn-through and swirl marks. An angled, undercut side allows more control around panel edges and ridges. For final finishing


Visit Store Now !!

Detail Products

Detail Reviews




Sep 10, 2011 10:51:06

Thursday, September 8, 2011

3.5" ORANGE CCS LIGHT CUTTING FOAM PAD (3.5 inch wide)

3.5" ORANGE CCS LIGHT CUTTING FOAM PAD (3.5 inch wide) Reviews


Other Picture


3.5" ORANGE CCS LIGHT CUTTING FOAM PAD (3.5 inch wide) Feature

  • Slows rate of polish absorption As discussed above, the pads are slow to absorb products and therefore the paint benefits from a longer working time. The same is true of liquid waxes and sealants.
  • Improves operator control CCS pockets gradually release polish as needed by the operator. Since these areas are not absorbing polish, they serve as little reservoirs until the excess polish is needed.
  • Prevents pad skipping CCS pockets reduce surface tension allowing the operator to run pad flat on a working surface. Basically, the CCS pockets break up the smooth surface of the foam to eliminate the sticking and skipping that occurs when two perfectly flat surfaces meet.
  • Creates less heat CCS pockets provide several points where the foam is not completely touching the paint. This reduces friction and therefore heat generated between the pad and the paint.
  • OEM approved OEM tests confirm CCS pads out-perform convoluted pad designs.
Orange Light Cutting Pad-This firm, high density foam is ideal for scratch and defect removal. The orange foam offers the correction of a typical compounding pad whilst at the same time allowing the polishing ability of light cut foam pad. When used with heavier compounds it will remove moderate swirls and scratches with little or no haze. It s an all around pad that will work on most light to moderate imperfections. (Measures 3.5 inches wide) Lake Countries CCS Technology revolutionize foam buffing pads. The patented Collapsed Cell Structure Technology is the result of many years research and development by Lake Country manufacturing. Tested an approved at OEM levels, these pads using strategic patterns of partially closed cells reduce the rate of polish absorption, improves operator control whilst at the same time reducing heat.


Visit Store Now !!

Detail Products

Detail Reviews




Sep 09, 2011 01:05:04

Wednesday, September 7, 2011

Gray Finishing CCS Smart Pads DA 5.5 inch Foam Pad

Gray Finishing CCS Smart Pads DA 5.5 inch Foam Pad Reviews


Other Picture


Gray Finishing CCS Smart Pads DA 5.5 inch Foam Pad Feature

  • CCS Technology revolutionizes foam buffing pads!
  • 5.5" x 7/8" CCS foam pad
  • Works with a 5" backing plate
  • Features Velcro brand hook & loop fasteners to secure the pad to the backing plate
  • OEM tests confirm CCS pads out-perform convoluted pad designs
Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. Use with machine glaze or finishing polish. Features patented "polish pocket" to control splatter. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.


Visit Store Now !!

Detail Products

Detail Reviews




Sep 08, 2011 00:43:09

Tuesday, September 6, 2011

CCS Spot Buffs Gray 4 inch Pads-2 pack

CCS Spot Buffs Gray 4 inch Pads-2 pack Reviews


Other Picture


CCS Spot Buffs Gray 4 inch Pads-2 pack Feature

  • CCS Technology revolutionizes foam buffing pads!
  • 4" x 1.25" CCS foam pad
  • Works with a 2.75" backing plate and a special drill adapter
  • Features Velcro brand hook & loop fasteners to secure the pad to the backing plate
Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls, but it is gentle enough to buff your vehicle to an attractive luster. Use with machine glaze or finishing polish.


Visit Store Now !!

Detail Products

Detail Reviews




Sep 06, 2011 16:30:13

Monday, September 5, 2011

Buffing Buff Bob Assortment Mini Cones

Buffing Buff Bob Assortment Mini Cones Reviews


Other Picture


Mounted on sturdy steel shanks, these felt buffing bob assortments really get into the tight spots. Great for putting the final touches on intricate pieces where larger buffs simply will not reach. All are made of long-lasting hard felt and will work well with any of our buffing compounds, sold separately. Great for removing buffing residue. The 1/8" shank buff bobs are ideal for fine trim work. Recommended maximum speed 15,000 RPM.


Visit Store Now !!

Detail Products

Detail Reviews




Sep 05, 2011 17:00:07

Saturday, September 3, 2011

3M 03156 2.1" x 4.77" Mediuum 2-in Conditioning Disc

3M 03156 2.1" x 4.77" Mediuum 2-in Conditioning Disc Reviews


Other Picture


3M 03156 2.1" x 4.77" Mediuum 2-in Conditioning Disc Feature

  • Great for gasket removing
  • Use for disc brake finishing and metal polishing too
  • Measures 2.1 inches x 4.77 inches
Great for gasket removing, disc brake finishing and metal polishing.


Visit Store Now !!

Detail Products

Detail Reviews




Sep 04, 2011 04:18:10

Friday, September 2, 2011

Meguiar's W 9207 7" Soft Buff 2.0 Foam Finishing Pad

Meguiar's W 9207 7" Soft Buff 2.0 Foam Finishing Pad Reviews


Other Picture


Meguiar's W 9207 7" Soft Buff 2.0 Foam Finishing Pad Feature

  • All new soft foam technology removes light swirls and creates a luxurious high gloss finish
  • 7 inch pad size reduces chatter resulting in easy buffing
  • High tech laminate provides durability and is machine washable
  • Recessed backing for easy centering
  • Easy to use with the Meguiar's G110V2 polisher
Meguiar's Soft Buff 2.0 Foam Finishing Pad has all new soft foam technology which removes light swirls and creates a luxurious high gloss finish. It has smooth buffing experience with minimal fatigue. High tech laminate provides durability and is machine washable. It has recessed backing for easy centering.


Visit Store Now !!

Detail Products

Detail Reviews




Sep 03, 2011 07:53:06

Thursday, September 1, 2011

7.5" Self-Centered HEX-LOGIC PAD - WHITE MEDIUM LIGHT POLISHING PAD (7.5"inch)

7.5" Self-Centered HEX-LOGIC PAD - WHITE MEDIUM LIGHT POLISHING PAD (7.5"inch) Reviews


Other Picture


7.5" Self-Centered HEX-LOGIC PAD - WHITE MEDIUM LIGHT POLISHING PAD (7.5"inch) Feature

  • The Hex-Logic Chemical Guys Pads are meant to work on flat or rounded/angled surfaces.
  • The unique construction of the pads makes them extremely easy to maneuver while retailing the correct amount of product evenly distributed through the pad,
  • Hex-Logic Pads keep product in the groves while you start and as the pad is spun and rubbed against the surface the polish with travel thought the hex-groves into the pad evenly delivering a superior accurate finish, while keeping the surface constantly lubricated to reduce friction and marring.
  • The unique Hex Laser Cute Surface of the pad enables Hex-Logic pads to conform to the shape of the surface delivering maximum surface contact.
  • Unique Hexagon construction form perfectly to a vehicles many curves while he unique pad construction reduces unnecessary heat.
self centering pad pad White Medium -Light Polishing Pad -Less dense foam formula for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so its perfect for pre-wax cleaners. It is the most well used pad as it is ideal for application of pre wax cleansers as well as many finishing polishes such as Pro-Polish Or FP-Final Polish


Visit Store Now !!

Detail Products

Detail Reviews




Sep 01, 2011 17:35:04